Continuous Catalytic Reforming Unit (CCR Unit) - China Petroleum Chemical Equipment Network

Continuous Catalytic Reforming Unit (CCR Unit) - 图片 2

连续催化重整装置（CCR装置）

Core Equipment

Radial reforming reactor Continuous catalyst regenerator (core equipment of CCR) Multi-pass vertical heating furnace Recycle hydrogen compressor High-pressure separator Stabilizer and heat exchange & cooling equipment

Core Technologies

Low-pressure continuous catalytic reforming reaction technology Continuous catalyst regeneration and circulation transportation technology High-efficiency hydrogen recovery and recycling technology Anti-coking and anti-corrosion design for long service life Heat energy recovery and unit energy-saving optimization

点击这里

产品介绍

连续催化重整装置（CCR装置）

A Continuous Catalytic Reforming Unit (CCR Unit) is a core processing unit in modern oil refineries and petrochemical plants. It is designed to convert low-octane straight-run naphtha into high-octane reformate, an important blending component for clean gasoline. Meanwhile, it produces valuable hydrogen and aromatic hydrocarbons such as benzene, toluene and xylene (BTX), which are widely used as petrochemical feedstocks.

The biggest advantage of CCR units over conventional semi-regenerative reforming units is the continuous catalyst regeneration system. During the reaction, coked and deactivated catalyst is continuously transported to a regenerator, where coke is burned off and the catalyst is reactivated. The regenerated catalyst is then recycled back to the reaction system, allowing the unit to operate stably for a long period under high efficiency, low pressure and high severity conditions.

Typical reactions in catalytic reforming include dehydrogenation, isomerization, dehydrocyclization and hydrocracking, which take place under elevated temperature and moderate pressure with the support of platinum-based or bimetallic catalysts. The hydrogen produced is recycled internally or supplied to other hydrotreating units, greatly improving the overall economy and hydrogen balance of the refinery.

Types and Characteristics of Equipment

Type

Equipment Type: Continuous Catalytic Reforming Unit (CCR), a core reaction equipment in refineries for producing high-octane gasoline and by-product hydrogen.

Features

The catalyst can be continuously regenerated and recycled, enabling long-term non-shutdown operation of the unit.Using naphtha as feedstock, it produces high-octane gasoline and aromatics, with high-purity hydrogen as a by-product.It features low reaction pressure and significant octane number improvement, with oil products meeting Euro V / Euro VI standards.With high hydrogen output, it can support hydrogenation units across the plant, delivering high economic efficiency.Highly automated with centralized DCS control, ensuring stable operation and maintenance.Adaptable to various types of crude oil from the Middle East, Russia and Tanzania, it is a mainstream complete set of refining and chemical equipment exported from China.

连续催化重整装置（CCR装置）

A Continuous Catalytic Reforming Unit (CCR Unit) is a key refinery unit that upgrades low-octane naphtha into high-octane gasoline blending components.

连续催化重整装置（CCR装置）

It produces high-purity hydrogen and valuable aromatic hydrocarbons (BTX) while enabling long-term, stable operation through continuous catalyst regeneration.

连续催化重整装置（CCR装置）

Using advanced catalytic reactions under high temperature, it improves gasoline quality and supports the overall efficiency of modern petrochemical facilities.

Basic Principles and System Composition

Basic Working Principle

Basic Principle

Under the action of heating, a hydrogen atmosphere and platinum-based catalyst, hydrocarbons in naphtha undergo reactions such as dehydrogenation, isomerization and cyclization, with their molecular structures rearranged, thus significantly increasing the octane number. The catalyst gradually deactivates during the reaction and can be continuously sent to the regeneration system for coke burning and reactivation, realizing continuous operation of the whole process.

Overall System Composition

System Composition

Feedstock Pre-treatment System: Naphtha hydrodesulfurization, denitrification and dehydration Reaction System: Multiple radial reactors in series, heating furnaces, hydrogen mixing system Continuous Catalyst Regeneration System: Regenerator, transfer pipelines, lock hoppers Separation and Stabilization System: High-pressure separators, stabilizers, air coolers, heat exchangers Hydrogen Circulation System: Recycle hydrogen compressors, make-up hydrogen system Instrumentation and Safety Control System: DCS, SIS, alarm and interlock system

Basic Principles and System Composition

Naphtha is subjected to pre-hydrotreating to remove impurities and protect the catalyst.The feedstock is mixed with recycle hydrogen and heated in a heating furnace.It sequentially enters multiple radial reactors for reforming reactions.The reaction products are cooled and separated under high pressure, and hydrogen is recycled.The liquid phase enters the stabilizer for fractionation to obtain high-octane gasoline components. Deactivated catalyst is continuously sent to the regenerator for regeneration and returned to the reactors for recycling.